EAGLE INDUSTRIES LTD.


 

EDB Series High Speed Precision Lathe

  • Large spindle bore of 65mm
  • Main spindle dynamic balanced, and supported at 2 points with taper roller bearings of Harbin brand
  • Outward appearance featuring large plains, making the machine more good-looking
  • Gapped bedways, which are super-audio frequency hardened (HB 450 plus)
  • All gears hardened and ground by Reishauer grinding machine
  • Leadscrew and feedrod interlocked, both with overload protection
  • Automatic feed stopper
  • Configuration variable totally according to orders:
    Metric or inch system; right or left hand wheel; large plane type; halogen lamp; quick change tool past; DRO; T-slot compound; chuck guard; leadscrew hood; rapid traverse motor; electromagnetic brake; forced lubrication system
MODEL EDB6240 EDB6245 EDB6250
Item No.  115001 115004 115007
115002 115005 115008
115003 115006 115009
CAPACITIES Max. swing over bed (mm) 400(16") 450(18") 500(20")
Max. swing over cross slide (mm) 225(9") 285(11'/5") 325mm(13")
Center distance (mm) 1000, 1500, 2000mm
Max swing in gap (mm) 530(21") 580(23") 630(25")
Effective length of gap 260mm (101/4")
Bed width 330mm(13")
HEADSTOCK Spindle hole 65mm(23/5")
Spindle nose ISO-C6 or ISO-D6
Spindle taper Metric 70mm
Spindle speeds (Number) 22-1800rpm (15 steps)
FEEDS Metric threads range (Kinds) 0.5-28mm (66kinds)
Inch Threads range (Kinds) 1-56/inch (66kinds)
Module threads range (Kinds) 0.5-3.5mm (33kinds)
Diametral threads range (Kinds) 8-56 D.P (33kinds)
Longitudinal feeds range (Kinds) 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds)
Cross feeds range (Kinds) 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds)
Rapid traveling speed of carriage 5m/min (16.4ft/min)
Leadscrew size: Diameter Pitch 35mm/6mm or 35mm/ 1/4"
CARRIAGE Cross slide travel 300mm (13")
Compound rest travel 130mm(5")
Cross-section size of toolshank 25*20mm/(1*6/8inch)
TAILSTOCK Taper of tailstock sleeve Morse No.5
Diameter of tailstock sleeve 75mm(23/5")
Travel of tailstock sleeve 120mm(43/4")
MOTOR Main drive motor  5.5kw 
Coolant pump motor 0.125kw
Rapid traverse moter 0.12kw
Packing Size (L*W*H) (mm)  ¡¡
Center Distance£º    1000mm 2420*1150*1800(96*46*71in.)
¡¡         1500mm 2920*1150*1800(115*46*71in.)
¡¡         2000mm 3460*1150*1800(137*46*71in.)
Net Weight/Hross Weight(Kgs) ¡¡ ¡¡ ¡¡ ¡¡
Center Distance£º1000mm 1560/2210kgs 1580/2230kgs 1600/2250kgs
¡¡    1500mm 1770/2410kgs 1820/2460kgs 1830/2470kgs
¡¡    2000mm 2010/2780kgs 2050/2800kgs 2070/2820kgs

STANDARD ACCESSORIES

1.3-jaw chuck 250mm

2.Driving plate

3.Center & center sleeve

4.Wrenches

5.Oil gun

6.Operation manual

OPTIONAL ACCESSORIES

1.Steady rest

6.longitudinal automatic trip

2.Follower rest

7.Live center

3.4-jaw chuck 320mm

8.Quick change toolpost

4.Face plate

9.Taper copy ruler

5.Thread dial

10.4-position longitudinal automatic trip

¡¡

EDC Series Big Spindle Hole High Speed Precision Lathe

  • Oversized spindle bore of 80mm
  • Main spindle dynamic balanced, and supported at 2 points with taper roller bearing of Harbin brand
  • Outward appearance of machine features large plains, making the machine more good-looking
  • Gapped bedways, which are super-audio frequency hardened (HB450 plus)
  • All gears hardened and ground by Reishauer grinding machine
  • Leadscrew and feedrod interlocked, both with overload protection
  • Automatic feed stopper
  • Configuration variable totally according to orders:
    Metric or inch system; right or left hand wheel; halogen lamp; quick change; tool post; DRP; T-slot compound; chuck guard; leadscrew hood; rapid traverse motor; electromagnetic brake; forced lubrication system
Model EDC6240 EDC6245 EDC6250 EDC6260
Item No. 115012 115015 115018 115021
115013 115016 115019 115022
115014 115017 115020 115023
CAPACITIES Max. swing over bed (mm) 400(16") 450(18") 500(20") 600(24")
Max. swing over cross slide (mm) 225 (9") 285(111/5") 325(13") 360(14")
Center distance (mm) 1000,1500, 2000mm
Max swing in gap (mm) 530(21") 580(23") 630(25") 730(29")
Effective length of gap 260mm (101/4")
Bed width 330mm(13'')
HEADSTOCK Spindle hole 80mm(23/5")
Spindle nose ISO-C8 or ISO-D8
Spindle taper Metric 85mm
Spindle speeds (Number) 24-1600rpm (15 Steps)
FEEDS Metric threads range (Kinds) 0.5-28mm (66Kinds)
Inch Threads range (Kinds) 1-56inch (66 Kinds)
Module threads range (Kinds) 0.5-3.5mm (33 Kinds)
Diametral threads range (Kinds) 8-56D.P (33 Kinds)
Longitudinal feeds range (Kinds) 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds)
Cross feeds range (Kinds) 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds)
Rapid traveling speed of carriage 5m/min (16.4ft/min)
Leadscrew size: Diameter Pitch 35mm/6mm or 35mm/ 1/4"
CARRIAGE Cross slide travel 300mm (13")
Compound rest travel 130mm(5")
Cross-section size of toolshank 25*20mm/(1*6/8inch) 25x25mm
TAILSTOCK Taper of tailstock sleeve Morse No.5
Diameter of tailstock sleeve 75mm(23/5")
Travel of tailstock sleeve 120mm(43/4")
MOTOR Main drive motor  5.5kw 

7.5kw
Coolant pump motor 0.125kw
Rapid traverse moter 0.12kw
Packing Size (L*W*H) (mm)  ¡¡ ¡¡ ¡¡ ¡¡
Center Distance£º    1000mm 2420*1150*1800(96*46*71in.)
¡¡         1500mm 2920*1150*1800(115*46*71in.)
¡¡         2000mm 3460*1150*1800(137*46*71in.)
Net Weight/Hross Weight(Kgs) ¡¡ ¡¡ ¡¡ ¡¡ ¡¡
Center Distance£º1000mm 1640/2290kg 1680/2330kg 1700/2350kg 1800/2500kg
¡¡    1500mm 1850/2550kg 1890/2590kg 1910/2610kg 2010/2760kg
¡¡    2000mm 2090/2860kg 2130/2880kg 2150/2920kg 2250/3070kg

¡¡

STANDARD ACCESSORIES

1.3-jaw chuck 250mm
2.Driving plate
3.Center & center sleeve
4.Wrenches
5.Oil gun
6.Operation manual

OPTIONAL ACCESSORIES

1.Steady rest

6.longitudinal automatic trip

2.Follower rest

7.Live center

3.4-jaw chuck 320mm

8.Quick change toolpost

4.Face plate

9.Taper copy ruler

5.Thread dial

10.4-position longitudinal automatic trip
¡¡

EBD Series Bench Lathe

  • Guideways super-audio frequency quenched and precision ground to ensure long service life and high accuracy
  • All headstock gears induction hardened and precision ground for smooth shifting and low noise
  • Quick change D-8 camlock spindle nose for fast chuck removal
  • Large 1 1/2"thru spindle speed bore to enhance bar capacity
  • 9 steps of main spindle speed ranging from 60 to 1200 rpm
  • With removable gap block to increase swing in front of spindle
  • With chuck guard, leadscrew hood and tool-post protection board, conform to “CE?standards.
  • Equipped with longitudinal stop
  • Feed rod and leadscrew interlocked
  • Tailstock locked by eccentric wheel
Model EBD-1220 EBD-1230 EBD-1340
Item No. 115030 115031 115032
CAPACITIES Max. swing over bed (mm) 304(12") 304(12") 330(13")
Max. swing over cross slide (mm) 170 (6 3/4") 170 (6 3/4") 204 (8")
Max. swing over gap (mm) 430(17") 430(17") 464 (18 1/4")
Center distance (mm) 500 (20") 750 (30") 1000 (40")
Cross slide travel(mm) 184 (7 1/4")
Bed width (mm) 186 (7 1/3")
SPINDLE Spindle hole §¶40mm (1 1/2")
Spindle nose ISO-D5
Spindle taper Morse No.5
Spindle speeds (Number) 60-2000rpm (9Steps)
FEEDS Metric threads range (Kinds) 0.25-900 (20 Kinds)
Inch threads range (Kinds) 4-72 Inch (33 Kinds)
Module threads range (Kinds) 0.25-3.5 (12 Kinds)
Diametral threads range (Kinds) 8-144D.P (30 Kinds)
TAILSTOCK Dia. of tailstock sleeve §¶40mm (1 1/2")
Taper of tailstock sleeve Morse No.3
Travel of tailstock sleeve 115mm
MAIN MOTOR(kw) 1.1/1.5
NET WEIGHT/GROSS WEIGHT(kgs) 480/580 520/620 650-750
PACKING SIZE (L*B*H) 2SETS(cm) 140*115*167 165*115*167 190*115*167

¡¡

STANDARD ACCESSORIES

1.3-jaw chuck 160mm

5.steady rest

2.center & center sleeve

6. follower rest

3. wrenches

7. driving plate

4. oil gun

8. operation manual

OPTIONAL ACCESSORIES

1. 4-jaw chuck 200mm

4. longitudinal automatic trip

2. face plate

5. Live center

3 thread dial

¡¡

¡¡

ECY series large spindle bore precision lathe

Specifications ECY6260 ECY6266 ECY6280
1000 1000 ¡¡
1500 1500 ¡¡
2000 2000 2000
¡¡ 3000 3000
Item No. 115037 115040 ¡¡
115038 115041 ¡¡
115039 115042 115044
¡¡ 115043 115045
CAPACITIES Swing over bed 600(24") 660(26") 800(32")
Swing over cross slide 400mm 460mm 600mm
Swing in gap 800(31 1/2 ") 860(33 4/5 ") 1000(39")
Valid length of gap  280mm(11")
Max. length of work piece  1000mm(39 1/3"),1500mm(59"),
2000mm(78 3/4"),3000mm(118") 
width of bedways  400mm (16 1/2")
HEADSTOCK Spindle nose ISO-C11 or ISO-D11 
Spindle bore ¦µ103mm(4")
Range of spindle speeds,Number 9-1275rpm,(18Steps)   16-816rpm.(6Steps)
¡¡ Max. travel of compound test  110mm
Max.travel of cross slide  325mm
Longitudinal leadscrew pitch  12mm or 2TPI 
FEEDS Section of tool 32*32mm
AND Longitudinal feeds range  72kinds 0.073-4.066mm/rev
THREADS Cross feeds range  72kinds 0.036-2.033mm/rev
¡¡ Metric threads range  72kinds 0.5-112mm/rev
¡¡ Inch threads range  72kinds 56-1/4t/inch 
¡¡ Module threads range  36kinds 0.5-7mm 
¡¡ Diametral threads range  36kinds 56-4Dp
TAILSTOCK Dia. of tailstock sleeve ¦µ90mm
Morse taper of tailstock sleeve  Morse No.6
Travel of tailstock sleeve  150mm
Cross adjustment range  10mm
MOTOR Power of main motor 7.5KW 10KW
Power of quick-travel motor 250W
Power of coolant pump  90W
Power supply aplicable  220V, 380V, 420V (50HZ,60HZ)
PACKING 1000mm 2820*1300*2100mm
SIZE 1500mm 3320*1300*2100mm
(L*W*H) 2000mm 3820*1300*2100mm
¡¡ 3000mm 4820*1300*2100mm
Net weight/Gross weight 1000mm 2900/3500kg 3000/3600kg 3150/3750kg
1500mm 3150/3750kg 3250/3850kg 3400/4000kg
2000mm 3400/4050kg 3500/4150kg 3650/4300kg
3000mm 3800/4450kg 3900/4550kg 4050/4700kg

STANDARD ACCESSORIES

1.3-jaw chuck

2.Driving plate

3.Center & center sleeve

4.Wrenches

5.Oil gun

6.Operation manual

OPTIONAL ACCESSORIES

1.Steady rest

6.longitudinal automatic trip

2.Follower rest

7.Live center

3.4-jaw chuck

8.Quick change toolpost

4.Face plate

9.Taper copy ruler

5.Thread dial

10.4-position longitudinal automatic trip

BENCH LATHE
STANDARD ACCESSORIES OPTIONAL ACCESSORIES
  3-jaw chuck;
  Oil Gun;
  Reduction sleeve;
  Wrenches;
  Centers;
  Coolant Systems.		   4-jaw chuck;
  Face plate;
  Follow rest;
  Steady rest;
  Driving plate.

 LC300A/750


MODEL

LC300A

 LC340A LC360B
SPECIFICATIONS
  Max. swing over bed 300mm(12") 340mm(13 3/8") 360mm(14")
  Max. swing over cross slide 170mm(6 3/4") 205mm(8") 220mm(8 4/5")
  Max. swing over gap 430mm(17") 470mm(18 1/2") 500mm(20")
  Distance between centers 500mm(20")
750mm(30")		 750mm(30")
1000mm(40")		 1000mm(40")
  Width of bed 186mm(7 1/3") 220mm(4/5")
  Spindle nose D5 OR D1-5(CAMLOCK)
  Spindle bore 38mm(1 1/2")
  Spindle speeds(number) 60Hz 60¡«2000r.p.m(9 STEPS OR 18 STEPS)
50Hz 60¡«2000r.p.m(9 STEPS)  50¡«1720r.p.m.(18 STEPS)
  Metric threads 0.25¡«9MM(20 KINDS)
  Inch threads 4¡«72 T.P.I.(33 KINDS)
  Module threads 0.25¡«3.5mm(12 KINDS)
  Diametral pitch threads 8¡«144 D.P.(18 KINDS)
  Longitudinal feeds range 0.032¡«0.44mm(0.0012¡«0.0175in)
  Cross feeds range 0.016¡«0.22mm(0.0006¡«0.0088in)
  Main motor power 1.1KW 1.1KW/1.5KW 1.5KW/2.2KW
  Net/gross weight(kgs) 480/580 520/620 550/650 650/750 800/900
  Item No 111010
111011		 111015
111016		 111018

MODEL

C0632A

SPECIFICATIONS
 Max. swing diameter over bed 13"(330mm)
 Max. swing diameter over gap 183/4"(476mm)
Swing diameter over tool carrier 7/4"(185mm)
 Bed width 73/8"(187mm)
 Max. Length of workpiece 30"(750mm)40"(1000mm)
 Spindle nose D1-4
 spindle bore 11/2"(¦Õ38mm)
 Taper of hole in spindle morse No.5
 Spindle speed step 8
 Spindle speed scope 70¡«2000r/min
 Inch thread 4¡«56T.P1/32
 Metric thread 0.4¡«7mm/32
 Diametral thread 8¡«120D.P/33  CO632A
 Module thread 0.2¡«3.5MP/27
 Longitudinal feed range 0.0032¡«0.1.67in/r(0.082¡«2.71mm/r) Standard accessory Sepecial accessory
 Transversal feed range 0.00086¡«0.0367in/r(0.022¡«0.933mm/r) Sleeve MT-5/3 4-Jaw chuck 8"(¦Õ 200mm)
 Max. travel of traistock quill 3-5/8"(95mm) Centers: MT-3 Face plate 12"(¦Õ 300mm)
 Taper hole of tailstock No.3 Alloy Center MT-3 Steady rest
 Electric motor 2HP(1.5KW)110v or 220v(1ph) 3Jaw chuch6"(¦Õ 160mm) Follow rest
220v of 380v(3ph) Metric or inch changing gears Foot brake
 Net weight/Gross weight(1000mm) 495/595kg Tool box and tools
 Item no 11025/11026 Oil gun
BENCH LATHE

¡¡
¡¡

MODEL

 LN-1640 LN-1660 LC400D LC460D

SPECIFICATIONS

 ¡¡
 Max. wing over bed

400mm (16")

 400mm(16") 460mm(18")
 Max. swing over cross slide 210mm(8 1/4") 240mm(9 1/2") 300mm(11 4/5")
 Max. swing over gap 590mm(23") 590mm(23") 650mm(25 3/5")
 Distance between centers 1000mm(40")/1500(60") 1000mm(40") 1500mm(60")
 Width of bed 300mm(11 4/5") 320mm(12 3/5")
 Spindle nose(camlock) D1-6 & D6 D1-8 & D8 D1-6 & D6(CAMLICK)
 Spindle bore 58mm(2 1/3") 58mm(2 1/3") 58mm(2 1/3")
 Spindle speed(12steps) 50¡«2000r.p.m. 48¡«1800r.p.m. 26¡«1600r.p.m.
 Metric threads 0.5¡«7mm(21Kinds) 0.5¡«7mm  (21 kinds)
 Inch threads 4¡«56T.P.I(32Kinds) 4¡«56T.P.I  (32 kinds)
 Module threads 0.5¡«7mm(21Kinds) 0.5¡«7mm  (21 kinds)
 Diametral pitch threads 4¡«56D.P.(32Kinds) 4¡«56D.P.  (32 kinds)
 Longitudinal feeds range 0.059¡«0.831mm(0.002¡«0.033in) 0.059¡«0.831mm/r
 Cross feeds range 0.019¡«0.271mm(0.001¡«0.011in) 0.018¡«0.250mm/r
 Main motor power 4KW/5.5KW 4KW 5.5KW
 Net/gross weight(kgs) 1800/2000 2000/2200 2000/2200 2200/2400 1800/200KGS
2000/2200KGS		 2200/2400KGS
2400/2600KGS
 Item no 111040/111041 111045/111046 111030/111031 111035/111036
STANDARD ACCESSORIES OPTIONAL ACCESSONRIES
  3-jaw chuck; Oil Gun;   4-jaw chuck; Face plate;
  Reduction sleeve; Wrenches;   Steady rest; Follow rest;
  Centers; Coolant Systems.   Driving plate.

Tel:86-532-85765684 85763919  Fax:86-532-85722673  E-mail :eagle@public.qd.sd.cn