MAIN SPECIFICATIONS
|
Item |
Type |
|
FW80 |
F11 100A |
F11 125A |
F11 160A |
|
Center height (mm/in) |
80
3.15 |
100
3.94 |
125
4.92 |
160
6.30 |
|
Tilting angle of the spindle |
¡Ý 95¡ã ; ¡Ý 5¡ã |
Rotating angle of the spindle for one complete
revolution of the dividing handle |
9¡ã |
|
Min. value of the vernier |
10" |
|
Worm gear ratio |
1:40 |
|
Diameter of spindle register taper (mm/in) |
¦µ36.541
¦µ1.441 |
¦µ41.275
¦µ1.63 |
¦µ53.975
¦µ2.13 |
|
Spindle taper bore (Morse) |
MT NO.3 |
MT NO.4 |
|
Width of the locating key (mm/in) |
14
0.55 |
18
0.71 |
|
Hole No. of hole plate |
First Face
|
24, 25, 28, 30, 34, 37, 38, 39, 41, 42, 43 |
| Second Face |
46, 47, 49, 51, 53, 54, 57, 58, 59, 62, 66 |
|
Module of change gears (mm/in) |
1.5
0.06 |
2
0.08 |
|
Teeth No. of change gears |
25, 25, 30, 35, 40, 50, 55, 60, 70, 80,
90, 100 |
Individual indexing error of the spindle for one
complete revolution of dividing handle |
60" |
¡À45" |
Accumulative indexing error in any each of
the four quadrants |
¡À1' |
|
Item No |
521010 |
521012 |
521014 |
521016 |
|
|
DIRECT DIVIDING HEAD
 |
OPTIONAL
ACCESSORIES
Tailstock Gear bracket Change
gear Jack Center Carrier Hole plate
Flange Vernier dial 3-jaw
chuck Face plate(Optional)
MAIN
SPECIFICATIONS
mm/in
|
Item |
TypeF2 |
TypeF3 |
|
Height of centre (horizontal) |
149.25
5.90 |
150
591 |
|
Distance between the end face of chuck and
bottom |
173
6.81 |
126
4.96 |
|
Divisions |
2,3,44,6,8,12,24 |
2,3,4,6,8,12,24 |
|
Dia. of chuck |
210
8.27 |
210
8.27 |
|
Item No |
521018 |
521020 |
Standard
accessories: Masking plates. (6 pieces)
Optional
accessories: tailstock Face Plate Chuck
|
