EAGLE INDUSTRIES LTD.

　
DIRECT DIVIDING HEAD TYPE FNL100B

MAIN SPECIFICATIONS
　
Height of center (mm/in) 101.6
4
Internal diameter of spindle (mm/in) 31.75
1.25
Thread of spindle nose 21/4"〜8
Acceptable collect for front hole of spindle 5C
Weight (kg/lbs) 11.5/25.3
Item No 521022
　

ACCURACY

1 Item Tolerance
(mm/in)
2 Run-out of axis of dividing spindle (locating journal and shoulder) 0.005
0.0002
3 Radial run-out of center hole (measured at the 15/0.98 length of test bar) 0.015
0.0006
4 Parallelism of spindle center line to base surface 0.02
0.0008
5 Squareness of dividing spindle to angle surface 0.02
0.0008
6 Parallelism between center slot and dividing spindle 0.02
0.0008
7 Lateral offset of center slot to dividing spindle 0.02
0.0008
8 Dividing accuracy: individual spacing error ＼3'

PF100D/5C HORIZONTAL VERTICAL COLL3ET INDEX

　 mm/in
Height of center 3-15/16
Thread of spindle nose 2-1/4-8
Width of the locating key 10
0.47"
Run-out of axis of dividing spindle 0.005
0.0002
Radial run-out of center hole (Measured from spindle nose 25/0.98) 0.015
0.0006
Parallelism of spindle centre line to base surface 0.02
0.0008
Squareness of dividing spindle to angle surface 0.02
0.008
Dividing accuracy individual spacing error ＼3'
Item No 521026

MAIN SPECIFICATION

　
Height of center (mm/in) 70
2/75
Overall Length (mm/in) 233
9.17
Acceptable collet for front hole of spindle 5C
Item No 521024

Tel:86-532-85765684 85763919  Fax:86-532-85722673  E-mail :eagle@public.qd.sd.cn