EAGLE INDUSTRIES LTD.

Milling & Drilling Table 7"×7"
Features:
T-slots are 5/8" wide by 7/16" deep with an undercut to provide for T-nut hold down for fixtures jigs and other clamping devices
Small low silhouette table for light word. The Milling and Drilling Table fastens quickly to drill-press table using central base bolt. With adjustable gibs.
Height...........................................................................................................4-3/4"
Base........................................................................6-3/4" Dia, with 1-1/8"long bolt
Width.................................................................................................................7"
Depth.................................................................................................................7"
Table is rotatable 360", locks by two set screws and internal locking shoes.
Table travel 5" on either axis
Weight: 25 lbs. Approx
Item No: 531050

Compound slide Table 5 1/2"×12"
A heavy, rugged slide used in all kinds of postitioning, milling, drilling, microscope viewing and staging, adjustable bases for heavy loads, small jig boring, precision cutoff.
Table.......................................................................................5-1/2"×12", T-Slots
..................................................................................................on 2-1/2" centers
Height..........................................................................................................4-1/2"
Travel..........................................................................8" longitudinal, 5" transverse
Base............8"×9" oval, with U slots for up to. 5/8" bolts on 7-3/4" to 8-1/2" bolt circle
Weight..........................................................................................................45 lbs.
Item No......................................................................................................531052

Cross Table
Item no.	Measurement（mm)	Table size (mm)	Base size(mm)	Travel(mm)
531150	645×450×150	460×180	340×210	240×170
531152	860×520×170	590×150	360×280	280×230
531154	1050×535×180	730×210	360×280	370×210
531156	970×610×300	760×250	450×370	470×250

Angel Table

Adjustable.
Heavy castings and rugged construction
Graduation in degrees in 0 to 90° range
2 Screw lock setting
Saves setup time
Machined T: slots
Precision made

Table Size	Height	Weight	Item No
5"×6"	4-1/2	12 Lbs.	531054
6"×8"	5"	26 Lbs.	531056
8"×10"	6-1/2	62 Lbs.	531068
10"×12"	8"	110 Lbs.	531060
12"×16"	9"	165 Lbs.	531062

Tilt Table (W/O handle)
Features:
Heavy machined casting
Rable has clamping screws on each end
3 "T" Slots
Calibrated on end
Vernier graduation (5 Degrees)
Low profile provides low machine-head clearance
Platen will accept accessories and work pieces larger than its diameter

Table size	Height	T-Bolt Size	Weight	Item No
5"×7"	3-3/4	1/2	16 Lbs.	531064
7"×10"	5-1/2	1/2	41 Lbs.	531066
10"×15"	7-1/2	1/2	80 Lbs.	531068

Tilt Table (W.handle)

Table size	Height	T-Bolt Size	Weight	Item No
5"×7"	3-3/4	1/2	16 Lbs.	531065
7"×10"	5-1/2	1/2	41 Lbs.	531067
10"×15"	7-1/2	1/2	80 Lbs.	531069