  INTRODUCTION:
This machine can carry out turning, drilling ,milling, boring and thread-cutting. It is widely used for single or mass production of small and medium-sized parts. MAIN FEATURES:
¡ïInfinitely variable speed ¡ïWide range and high spindle speed ¡ïWide range of metric and inch thread-cutting ¡ïPower-driven in longitudinal and cross directions, thread-cutting, safe interlock ¡ïlengthened table ¡ïpower-driven-table for milling ¡ïa overload safety device
¡ïquick change between turning and drilling-milling ¡ïmotor quickly adjusted ¡ïcam-locking chuck | | SPECIFICATIONS | G1324 | G1340 | | Swing diameter over bed | 330mm | 13" | 330mm | 13" | | Swing diameter over table | 190mm | 7.5" | 190mm | 7.5" | | Distance between centers | 610mm | 24" | 990mm | 39" | | Spindle bore | 28mm | 1.1" | 28mm | 1.1" | | Spindle speed | 50¡«3000r/min | 50¡«3000r/min | | Longitudinal stroke | 510mm | 20" | 890mm | 35" | | Cross stroke | 185mm | 7.3" | 185mm | 7.3" | | Small toolpost stroke | 70mm | 2.75" | 70mm | 2.75" | | Metric pitch/grade | 0.35¡«6.5MM/24 | 0.35¡«6.5MM/24 | | Inch pitch/grade | 7¡«52T.P.I/21 | 7¡«52T.P.I/21 | | Longitudinal feed/grade | 0.067¡«0.5MM/R/21 | 0.067¡«0.5MM/R/21 | | Cross feed/grade | 0.021¡«0.157MM/R/21 | 0.021¡«0.157MM/R/21 | | Milling-drilling spindle taper | MT3 | R8 | MT3 | R8 | | Milling-drilling spindle stroke | 127mm | 5" | 127mm | 5" | | Milling-drilling box stroke | 110mm | 4.33" | 110mm | 4.33" | | Area of table | 450¡Á150mm | 17.7"¡Á5.9" | 450¡Á150mm | 17.7"¡Á5.9" | | Drilling diameter | 24mm | 0.95" | 24mm | 0.95" | | Power of motor | 1.5HP(1.1KW) | 1.5HP(1.1KW) | | N.W./G.W. of machine | 300/350kg | 330/390kg | | Overall dimensions of machine | 1325¡Á585¡Á1030mm | 1705¡Á585¡Á1030mm | | Case dimensions of machine | 1260¡Á470¡Á1100mm | 1640¡Á470¡Á1100mm | | Case dimensions of stand | Left:760¡Á450¡Á410mm | Right:760¡Á450¡Á350mm | | Item No. | 113035 | 113040 | | | STANDARD ACCESSORY
¡ïdrilling chuck ¡ïdrill taper stock
¡ïmilling shank
¡ïdrawing bar ¡ïcenter ¡ïexchange gear
¡ïtools | OPTIONAL ACCESSORY
¡ïstand ¡ïmilling chuck ¡ïmilling cutter
¡ïsteady rest ¡ïfollow rest ¡ïlive center | |
