page banner

Products

  • VERTICAL HORIZONTAL TOOL HOLDER DEVICE

    VERTICAL HORIZONTAL TOOL HOLDER DEVICE

    Item no. Taper of Tool Holder Outsize(mm) Weight(kg) 576401 BT30 205×98.5×128 3.7 576403 BT40 205×98.5×128 3.8 576405 BT50 275×150×198 11.4 576407 DIN69871.30 205×98.5×128 3.7 576409 DIN69871.40 205×98.5×128 3.8 576411 DIN69871.50 275×150×198 11.4 576413 CAT30 205×98.5×128 3.7 576415 CAT40 205×98.5×128 3.8 576417 CAT50 275×150×198 11.4
  • TYPE F1 BORING HEADS

    TYPE F1 BORING HEADS

    Catalog No. mm in F1-12 F1-18 F1-25 F1-1/2 F1-3/4 F1-1 Max. outside Dia 50 65 100 2 3 4 Boring Bar Dia 12 18 25 1/2 3/4 1 Max. offset 16 25 41 5/8 1 15/8 Min, graduation 0.01 0.0005 Shanks Straight shank 16-40 1/2~2 Taper shank R8, MT2, 3, 4, 5, 7: 24, ST, CT, BT30, 40, 45, 50 Item No 561481 561483 561485 561491 561493 561495
  • TYPE 287 END MILL CUTTERSHARPENER

    TYPE 287 END MILL CUTTERSHARPENER

    1. This fixture uses 5C collets which means any shank-size end mill from1/16″to1-1/8″can be ground,shell mills caneasily be held 2. Grind 2 3 4 6 8 & 12 fluted end mills and shell mills face only 3. Unique design that relief angles are built into base increazed the range of ground 4. Solid base ground on bottom for sure contact with magnet Item No. Diameter of shank of end mill Equal division 575050 3/8″ 1/2″ 5/8″ 2, 3, 4, 6, 8
  • TURRET HEAD MT4

    TURRET HEAD MT4

    Shaft MT4 Drilling 1-13mm Thread cutting and tapping: M3 M5 M8 M10 M12 Reaming 4-12mm Centering 1-4mm Tool mounts: -2 drill chucks 1.5-13mm -1 center point -1 taper mount MT 1 -1 each thread cutting unit for tap and holder Wight 7.5kg Item No. 576360
  • MORSE TAPER SLEEVES

    MORSE TAPER SLEEVES

    Item No3 Outside Inside L D taper taper (mm) (mm) 561515 1 0 80 12.065 561517 2 85 17.78 561519 1 92 561521 3 99 23.825 561523 2 112 561525 4 124 31.265 561527 3 140 561529 5 156 44.399 561531 4 171 561533 6 218 63.348 561535 5   Item No MT. MT. D L NO.S NO.T (mm) (mm) 561537 2 1 20 160 561539 2 30 175 561541 3 36 1...
  • 7:24 TO  MT. ADAPTER

    7:24 TO MT. ADAPTER

    Item No ISO7:24.NO.S. MT.NO. 561557 30 1 561559 2 561561 3   Item No ISO7:24.NO.S. MT.NO. 561563 40 1 561565 2 561567 3 561569 4 561571 50 1 561573 2 561575 3 561577 4  
  • TAP CHUCK

    TAP CHUCK

    Item No Model Morse D D1 d L1 L Tap Chuck Taper No mm mm mm mm mm 576310 J4812L/MS3 MT3 46 23.825 19 94 191 M3 M4 M5 M6 M8 M10 M12 576314 J4824L/MS3 MT3 66 23.825 30 94 227 M12 M14 M16 M18 M20 M22 M24 576318 J4812L/MS4 MT4 46 31.267 19 117.5 216 M3 M4 M5 M6 M8 M10 M12 576322 J4824L/MS4 MT4 66 31.267 30 117.5 252 M12 M14 M16 M18 M20 M22 M24 576326 J4824L/MS5 MT5 66 44.3...
  • SLOTTED ANGLE PLATES

    SLOTTED ANGLE PLATES

    WEBBED-END & OPEN-END Item No DIMENSIONS Webbed Open End A B C 513001 513101 3″ 2-1/2″ 2″ 513002 513102 3-1/2″ 3″ 2-1/2″ 513003 513103 4-1/2″ 3-1/2″ 3″ 513004 513104 6″ 5″ 4-1/2″ 513005 513105 7″ 5-1/2″ 4-1/2″ 513006 513106 8″ 6″ 5″ 513007 513107 9″ 7″ 6″ 51300...
  • ROUND PERMANENT-MAGNETIC CHUCK

    ROUND PERMANENT-MAGNETIC CHUCK

    Circular Permanent-Magnetic Chuck Item No Type L H C C X M Net weight (kg) 573310 X51 100 100 40 60 88 4 M6 2 573312 X51 125 125 48 80 144 4 M6 4 573314 X51 160 160 60 100 140 4 M8 8 573316 X51 200 200 67 160 186 3 M10 12 573318 X51 320 320 94 265 290 3 M12 49 573320 X51 400 400 95 378 300 6 M12 76 573322 X51 200Z 200 64 160 184 3 M1...
  • VERT.HOR. ROTARY TABLES

    VERT.HOR. ROTARY TABLES

    The TSL series horizontal and vertical rotary tables are for indexing,circular cutting.angle setting,boring,spot facing operations and similar work in conjunction with a milling machine.This type rotary table is so designed as to permit machining operarions at a higher dimension than that of TS type rotary table.The base can be used in a vertical position to enable to carry out center work with the help of tailstock.   A flange for connecting scroll chuck is special supplied,and be packed ind...
  • TILT TABLE(W.handle)

    TILT TABLE(W.handle)

    Table size Height T-Bolt Size Weight Item No 5″×7″ 3-3/4 1/2 16 Lbs. 531065 7″×10″ 5-1/2 1/2 41 Lbs. 531067 10″×15″ 7-1/2 1/2 80 Lbs. 531069
  • TILT TABLE (WO handle)

    TILT TABLE (WO handle)

    Features: Heavy machined casting Rable has clamping screws on each end 3 “T” Slots Calibrated on end Vernier graduation (5 Degrees) Low profile provides low machine-head clearance Platen will accept accessories and work pieces larger than its diameter Table size Height T-Bolt Size Weight Item No 5″×7″ 3-3/4 1/2 16 Lbs. 531064 7″×10″ 5-1/2 1/2 41 Lbs. 531066 10″×15″ 7-1/2 ...